Sanford · Seminole County
Home › Services
Panel and partial rescreens, full pool cage rescreens, screen door repair, pet-resistant mesh and 20×20 no-see-um mesh — plus the frame, spline and fastener work that decides whether new mesh will hold at all.
Sanford Rescreening does screen work in Sanford, Florida and nothing else: mesh, frames and doors on pool cages, lanais, porches and screen rooms. Mesh-only work is maintenance. Frame members, anchoring, footprint or height changes, and vinyl or acrylic conversions are structural work that needs a permit from the City of Sanford or Seminole County depending on the parcel.
One torn panel, or the six on the west wall that took the brunt of a storm. Panels are replaced individually against the existing frame, colour-matched to the mesh already on the cage where the remaining panels still have life in them.
Every panel out, every spline out, every panel back in. This is the right call when the mesh has gone brittle across the whole structure rather than failing in one spot — and it is the only point at which changing mesh type across the cage costs nothing extra in labour.
Doors fail first because they are the only moving part. Rollers, closers, latches, sagging corners and out-of-square frames, plus kick plates and pet doors. A door that drags is usually a frame problem, not a door problem.
Heavier vinyl-coated polyester woven to take claws and shoulders. Worth it on the lower panels and the door surround; usually not worth it on the roof panels, where the extra weight and reduced airflow buy you nothing.
20x20 and finer weaves for the Lake Monroe side of town, where the argument is not mosquitoes but chironomid midges packing a coarse weave solid with dead insects from spring through late autumn.
Corroded self-tapping fasteners, splayed spline grooves, bent chair rails and bottom rails that sat in standing water. On a 1960s Sunland Estates porch this is often the whole job — new mesh on a failed frame does not hold.
Four things get checked before anyone quotes a number.
Cages are priced in panels, not square feet, and panel count varies enormously across Sanford. A rear lanai in Hidden Lake, where houses run 914–1,713 sq ft, is a different structure from a custom cage in River Crest.
Bottom rails, anchors and self-tapping fasteners, especially on the low side of the slab. In Sunland Estates, built 1958–1970, the fastener system is usually the deciding factor rather than the mesh.
Water-facing walls, roof panels, the door surround and the lower panels can each take a different weave. Specifying one mesh for the whole cage is simpler to sell and usually wrong.
Full-length material has to physically reach the back of the house. Zero-lot-line parcels like Mayfair Meadows, gated entries at Lake Forest and Buckingham Estates, and preserve-backed lots at Retreat at Wekiva all change the plan.
Statewide market estimates, published here because “call for a quote” wastes your time. These are not our prices.
| Work | Statewide estimate | Notes |
|---|---|---|
| Single panel | $25–$75 per panel | From a secondary market summary and one Florida contractor blog. Indicative only. |
| Partial rescreen, several panels | $200–$900 | Same source basis as above. |
| Full pool enclosure rescreen | $1,500–$4,500+ | Roughly $1.50–$3.50 per square foot installed. |
| Fiberglass mesh (standard 18×14) | $0.75–$1.25 / sq ft | About $900–$1,600 for a full enclosure. Cited service life about five to seven years in Florida conditions. |
| Polyester mesh | $1.20–$1.80 / sq ft | About $1,500–$2,200 for a full enclosure. |
| Pet-resistant mesh | $1.50–$2.50 / sq ft | About $2,000–$3,000+ for a full enclosure. |
| Solar screen | $1.80–$3.00 / sq ft | About $2,700–$4,500 for a full enclosure. |
Permit fees, if a permit is required for your parcel and scope, are set by the City of Sanford or Seminole County and are not included in any figure above.
More detail, broken out by job type: full rescreen · panel & frame repair · mesh upgrades · screen doors.
Repair means fixing what is there: one or more panels of mesh replaced in an otherwise sound frame, a door rehung, a spline re-rolled, a fastener replaced. Replacement means the structure itself — new frame members, new anchors, or a new enclosure.
The distinction matters here for more than vocabulary. Mesh work is maintenance. Frame and anchoring work is structural, needs a permit under both local building departments, and is engineered to Seminole County's adopted 139 mph ultimate design wind speed for Risk Category II buildings.
Test the mesh, then test the frame. If mesh at a panel corner tears under light thumb pressure, that panel is past repair — and if several panels around the cage do the same thing, the whole cage is at end of life and a full rescreen beats repeated patching.
The frame is the harder call. Check the bottom rail and the anchors, especially on the low side of the slab where water stands. Chalky white pitting, fasteners that spin without biting, and rails that flex under hand pressure mean the structure needs work before any new mesh goes on it. New screen stretched onto a frame that cannot hold spline pressure will pull out.
The mechanics are simple: pull the old spline out of the groove with a pick, lift out the old mesh, lay new mesh over the opening with a few inches of overhang, roll the spline back into the groove with a spline roller working opposite corners to keep tension even, then trim the excess flush with a hooked blade.
What makes it go wrong is tension and height. Too tight and the mesh bows the frame member; too loose and it drums and flaps in wind. Roof and upper wall panels on a pool cage are ladder work over a concrete deck and water, which is the point at which most homeowners should stop. Ground-level lanai and porch panels are a reasonable DIY job.
Panel count, frame condition, mesh by wall and access. Those four answers turn a statewide range into your number.
Phone: (689) 666-9380 · Email: quotes@sanfordrescreening.com